HotPaw inTuna - Guitar Edition

Icon: [icon]

Screenshot: [screenshot]

The HotPaw inTuna Strobe Tuner, Guitar Edition, is an iPhone application that uses the built-in microphone on your iPhone to allow you to accurately tune your guitar via a visual display. It includes both a tuning indicator and a waterfall strobe window.

The 6 position tuning indicator allows you to see at a glance which string pitch the tuner is currently analyzing. Below the tuning indicator, a waveform is displayed in abstract form within a waterfall strobe window to allow extremely precise final tuning.

A waterfall strobe tuner is far more accurate than a guitar tuner with just a needle, or even a basic LED strobe tuner. With a waterfall strobe tuner, slight differences in frequency between the pitch which the microphone detects, and the ideal equally tempered pitch, will cause the abstract waveform to waver or move sideways as it cascades down the strobe window.

Also included is a pitch frequency readout in Hz and cents. Configuration options include support for 6 popular guitar tunings, and Concert A reference frequency adjustment. Touching the one of the note names on the display will play that reference pitch though your earphones.

------

A Short Users Manual for the HotPaw inTuna guitar tuner

Place your iPhone where it can hear you pluck your guitar strings, and tune your guitar by watching the inTuna display. The display will show several different indications about whether the pitch you are playing is sharp or flat.

Start the inTuna application and place your iPhone near your guitar with the microphone facing your guitar. Pluck one string at a time and watch the inTuna display. The height of the bar on the right indicates the volume the microphone is detecting. Make sure the correct indicator for the string you are tuning is displaying the pitch marker. You should see the marker move to the left or right of center for pitches that are flat or sharp. Try to center the marker by tuning up an down. For precise tuning, try to make the bars in the lower strobe window stand still; they are very sensitive to the slightest frequency change. At the bottom of the screen is the frequency measurement in Hertz and Cents (1/100ths of a semitone).

If guitar resonance or background noise is causing inTuna to detect notes other than the one which you are trying to tune, try turning off Auto String Detect mode in the Settings view. When Auto String Detect mode is off, tapping on a note name on the main display will lock frequency detection to only that note; background tones will be ignored.

If you have earphones plugged in, you can hear a reference pitch by tapping on the note names on the main display.

With many guitars, tuning up to the correct pitch from slightly below the correct frequency works best. Try to make sure only one string at a time is sounding, as harmonics from other strings might capture the displays attention.

Alternate tunings and adjustments to the reference Concert A frequency are available in the Setting view, which is brought up by tapping the "Settings" button.

------

inTuna - Guitar Edition
Version 2.0.1 Added Audio Session callbacks to properly handle incoming phone calls
Version 2.0.0 Added New Guitar Skin. Fixed tone generation, tuning accuracy & "jumpy" indicator issues.
Version 1.0.1 Corrected Application Name
Version 1.0.0 Initial release

------

Contact Hotpaw Productions

Website: http://www.hotpaw.com/rhn/hotpaw

------